5 tons of medical waste disposal equipment
In view of the special characteristics of the shape of medical waste, the principle of waste pyrolysis and gasification is adopted. The waste is pyrolyzed and gasified under oxygen-deficient conditions in the pyrolysis furnace. The gas temperature in the pyrolysis furnace is controlled at about 200~400°C, and the center temperature of the slag can reach At about 850°C, organic waste is converted into combustible components such as CO and CH4, as well as inorganic water vapor, acidic gas and slag. After the combustible gas enters the mixing chamber, it is strongly mixed with the tangentially entering air and then sent to the secondary chamber for combustion. The flue gas temperature at the outlet of the secondary chamber can reach 850-1100°C, and the flue gas residence time is more than 2 seconds. The organic matter in the flue gas is completely burned. The operation of the pyrolysis furnace and the secondary combustion chamber implements integrated control, which not only ensures the safe combustion of waste but also fully stimulates the heat of the waste itself, reducing operating costs.
PRODUCT FEATURES
Synchronous processing of 5 major categories of medical waste
Hospital sludge co-processing
Environmentally friendly emissions
Energy saving and efficient, clean production
Intelligent production, reducing manual intervention
Ultra-low disposal operation and maintenance costs
PRODUCT VIDEO
VIDEO INTRODUCTION
PRODUCT TECHNOLOGY
SPECIFICATIONS
TYPE
YLY-081
YLY-085
YLY-090
Disposal scale
1T/D
5T/D
10T/D
Processing scope
Pathological waste, infectious waste, damaging waste, pharmaceutical waste, chemical waste, hospital sludge
Equipment area
25*15*8m
28*15*8m
30*15*8m
Energy type
Natural gas, LPG, diesel, etc.
Area size
30m*15m*8m
35m*18m*8m
Work pressure
Slightly negative pressure
Equipment service life
10 years
FOR MORE DETAILS, PLEASE FILL IN YOUR PERSONAL INFORMATION AND WE WILL CONTACT YOU AS SOON AS POSSIBLE
Medical waste distributed emergency disposal shelter
The medical waste distributed emergency disposal shelters are designed according to two plans: distributed fixed-point disposal and mobile skid-mounted emergency disposal. The fixed-point disposal plan places the shelter at a fixed site and disposes on site; the mobile skid-mounted emergency disposal shelter is Vehicle-mounted, placed in the central control center, it can be used for fixed-point disposal or as a backup for emergency plans. It can be arranged flexibly according to the on-site conditions and can provide emergency support in response to sudden epidemics or public health events.
PRODUCT FEATURES
Medical waste destruction, disinfection and deformation are integrated to achieve harmless treatment of medical waste
Sterilized items can be wrapped and encapsulated as a whole to avoid secondary contamination of viruses and pathogenic bacteria during the unpacking process.
The disinfection temperature is maintained at 135-200°C, and the disinfection process does not produce any odor.
The disinfection effect of special disinfectants has clear test reagents
Intelligent production, reducing manual intervention
Kills all microorganisms, including bacterial spores
PRODUCT VIDEO
VIDEO INTRODUCTION
PRODUCT TECHNOLOGY
SPECIFICATIONS
FOR MORE DETAILS, PLEASE FILL IN YOUR PERSONAL INFORMATION AND WE WILL CONTACT YOU AS SOON AS POSSIBLE
Medical waste high temperature cooking equipment
The high-temperature sterilization system for medical waste includes a high-temperature cooking system. The high-temperature cooking process uses the latent heat released by water vapor to denature and coagulate the proteins of pathogenic microorganisms to sterilize medical waste. The high-temperature cooking process is used as the front-end treatment of the landfill process. It pre-treats the medical waste to inactivate bacteria and germs. The inactivated medical waste is crushed and destroyed before being sent to the landfill for disposal. The high-pressure steam sterilization method is to pass steam at 130-190°C into a sealed autoclave to generate an internal pressure of 100-500kPa. The medical waste stays in the autoclave for 30-80 minutes to be fully penetrated. , ensuring that pathogenic organisms are destroyed. High-temperature steam sterilization is a simple, feasible, economical, reliable, fast and safe sterilization method. Medical waste after sterilization can be disposed of like ordinary domestic waste.
PRODUCT FEATURES
The equipment can work continuously
The equipment can meet the processing capacity of 20 tons/day
Using advanced high-temperature cooking technology, low disposal costs and high efficiency
The equipment adopts a skid-mounted structure, making installation, maintenance and relocation convenient and safe.
The entire equipment adopts PLC automatic control system, which does not require a large number of operators.
PRODUCT VIDEO
VIDEO INTRODUCTION
PRODUCT TECHNOLOGY
SPECIFICATIONS
number
Technical Parameters
numerical value
Remark
Rated batch processing capacity
1-2-5-10 tons/day
single set
Processing method
Renewal
Number of sterilization trucks per batch
3 vehicles
per set
Effective volume of a single sterilization vehicle
1.26m³
Medical waste reference density
110-200kg/m³(取150kg/m³)
Time spent processing each batch
75min
Total time required to reach daily processing volume
675min(12h)
Log kill value
≥4.00
When the number of biological indicators is expressed as a logarithm, the value of the decrease in the number of biological indicators before and after disinfection treatment.
Sterilization rate
99.99%
10
Water Consumption
1KG/time
11
Waste residue
Granular
12
Exhaust gas
Comply with
Comply with GB 39707-2020、GB14554-93
13
Wastewater
No emissions
14
Noise
55–85dB
Comply with GB 12348-2008
FOR MORE DETAILS, PLEASE FILL IN YOUR PERSONAL INFORMATION AND WE WILL CONTACT YOU AS SOON AS POSSIBLE
10 tons of medical waste disposal equipment
In view of the special characteristics of the shape of medical waste, the principle of waste pyrolysis and gasification is adopted. The waste is pyrolyzed and gasified under oxygen-deficient conditions in the pyrolysis furnace. The gas temperature in the pyrolysis furnace is controlled at about 200~400°C, and the center temperature of the slag can reach At about 850°C, organic waste is converted into combustible components such as CO and CH4, as well as inorganic water vapor, acidic gas and slag. After the combustible gas enters the mixing chamber, it is strongly mixed with the tangentially entering air and then sent to the secondary chamber for combustion. The flue gas temperature at the outlet of the secondary chamber can reach 850-1100°C, and the flue gas residence time is more than 2 seconds. The organic matter in the flue gas is completely burned. The operation of the pyrolysis furnace and the secondary combustion chamber implements integrated control, which not only ensures the safe combustion of waste but also fully stimulates the heat of the waste itself, reducing operating costs.
PRODUCT FEATURES
Synchronous processing of 5 major categories of medical waste
Hospital sludge co-processing
Environmentally friendly emissions
Energy saving and efficient, clean production
Intelligent production, reducing manual intervention
Ultra-low disposal operation and maintenance costs
PRODUCT VIDEO
VIDEO INTRODUCTION
PRODUCT TECHNOLOGY
SPECIFICATIONS
TYPE
YLY-081
YLY-085
YLY-090
Disposal scale
1T/D
5T/D
10T/D
Processing scope
Pathological waste, infectious waste, damaging waste, pharmaceutical waste, chemical waste, hospital sludge
Equipment area
25*15*8m
28*15*8m
30*15*8m
Energy type
Natural gas, LPG, diesel, etc.
Area size
30m*15m*8m
35m*18m*8m
Work pressure
Slightly negative pressure
Equipment service life
10 years
FOR MORE DETAILS, PLEASE FILL IN YOUR PERSONAL INFORMATION AND WE WILL CONTACT YOU AS SOON AS POSSIBLE
1 ton medical waste disposal equipment
In view of the special characteristics of the shape of medical waste, the principle of waste pyrolysis and gasification is adopted. The waste is pyrolyzed and gasified under oxygen-deficient conditions in the pyrolysis furnace. The gas temperature in the pyrolysis furnace is controlled at about 200~400°C, and the center temperature of the slag can reach At about 850°C, organic waste is converted into combustible components such as CO and CH4, as well as inorganic water vapor, acidic gas and slag. After the combustible gas enters the mixing chamber, it is strongly mixed with the tangentially entering air and then sent to the secondary chamber for combustion. The flue gas temperature at the outlet of the secondary chamber can reach 850-1100°C, and the flue gas residence time is more than 2 seconds. The organic matter in the flue gas is completely burned. The operation of the pyrolysis furnace and the secondary combustion chamber implements integrated control, which not only ensures the safe combustion of waste but also fully stimulates the heat of the waste itself, reducing operating costs.
PRODUCT FEATURES
Synchronous processing of 5 major categories of medical waste
Hospital sludge co-processing
Environmentally friendly emissions
Energy saving and efficient, clean production
Intelligent production, reducing manual intervention
Ultra-low disposal operation and maintenance costs
PRODUCT VIDEO
VIDEO INTRODUCTION
PRODUCT TECHNOLOGY
SPECIFICATIONS
TYPE
YLY-081
YLY-085
YLY-090
Disposal scale
1T/D
5T/D
10T/D
Processing scope
Pathological waste, infectious waste, damaging waste, pharmaceutical waste, chemical waste, hospital sludge
Equipment area
25*15*8m
28*15*8m
30*15*8m
Energy type
Natural gas, LPG, diesel, etc.
Area size
30m*15m*8m
35m*18m*8m
Work pressure
Slightly negative pressure
Equipment service life
10 years
FOR MORE DETAILS, PLEASE FILL IN YOUR PERSONAL INFORMATION AND WE WILL CONTACT YOU AS SOON AS POSSIBLE
